Neptune 4 Pro First layer issues (after autoleveling etc.) r/elegoo

Elegoo Neptune 4 Pro Initial Layer. Elegoo Neptune 4 Review Klipper + Layer Fans = High Speed Before setting the z-offset, the build plate and nozzle need to be heated up for a while (This video of a Neptune 4 Max shows it taking 25 minutes to stabilize, and although the Max build plate is larger, the same concept applies to the standard Neptune build plate) For the Neptune 4/Neptune 4 Pro model, the recommended [Y Position] setting is 230.

The plastic is 3DJake EcoPLA, and I've set the temperatures to 205° on the nozzle and 60° the bed.. 3.In [Preview] mode, slide the navigation bar on the right to view the number of layers that the model needs to pause at a specific layer, fill in the [Layer] box, and set the [X Position] [Y Position]

Elegoo Neptune 4 Pro Imprimante 3D FDM Grande Vitesse

¶Troubleshooting ¶ Neptune 4/4 Pro ¶ Poor print quality and layer shifts?Check whether the XY guide rail is lubricated regularly The plastic is 3DJake EcoPLA, and I've set the temperatures to 205° on the nozzle and 60° the bed.. Before setting the z-offset, the build plate and nozzle need to be heated up for a while (This video of a Neptune 4 Max shows it taking 25 minutes to stabilize, and although the Max build plate is larger, the same concept applies to the standard Neptune build plate)

Learn More about New Products 2023 Saturn 3 Ultra & Neptune 4 Pro & M. If not lubricated regularly, it will cause wear and damage. Check out how to set up the perfect Elegoo Neptune 4 (Pro) Cura profile! All3DP; All3DP Pro; Rapid + TCT 2025 Get Started Projects Hardware & Services Software Materials Industries

Elegoo Neptune 4 Pro FDM 3D Printer Robu.in Indian Online Store. Just got the Neptune 4 Pro yesterday as my first FDM printer (have the Saturn 2 which I quite like), and am still in the process of calibrating stuff. Heating up the nozzle also affects the distance readings, changing by 0.03mm.